Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Pattern Mode
Pattern Play
[F1] PLAY
[F2] GROOVE
[F3] TRACK
[F4] PATCH
[F5] REMIX
[F6] CHAIN
Pattern Record
Pattern Record Standby
[F1] SETUP
[F2] VOICE
[F3] ARP ED
[F5] CLICK
During Pattern Recording
[F1] SETUP
[F3] RESET
[F4] TIE
[F5] DELETE
[F6] BAK DEL
Pattern Edit
[F1] CHANGE
[F2] VIEW FLT
[F5] INSERT
[F6] DELETE
Pattern Job
[F1] UNDO/REDO
[F2] NOTE
[F3] EVENT
[F4] PHRASE
[F5] TRACK
[F6] PATTERN
Supplementary Information
105
Pattern Record
Pattern Record Standby mode
NOTE The Phrase length is specified by the length parameter in the PLAY display of the Pattern mode.
Type
Determines the Recording Type. The Recording Type can be divided into two groups: Realtime recording and Step
recording. With Realtime recording, the instrument functions in the same way as a tape recorder, recording the
performance data as it is played. This allows you to capture all the nuances of an actual performance. In Realtime
recording, the “Type” should be set to “replace,” “overdub,” or “punch.” With Step recording, you can compose your
performance by “writing” it down one event at a time. This is a non-realtime, step recording method—similar to writing
music notation onto paper. In Step recording, the “Type” should be set to “step.”
Settings: replace, overdub, step
Loop
Turns loop recording on or off. When set to on, the Phrase will play repeatedly during Realtime recording. This can be
handy when recording drum parts, allowing you to add different instruments on each pass. When set to off, recording
stops after one pass through the Phrase.
Settings: off, on
Quantize
This is same as “Quantize” in the SETUP display of Song Record (page 79).
Event
This is same as “Event” in the SETUP display of Song Record (page 79).
(Tempo)
Determines the Pattern tempo.
Settings: 005.0 – 300
NOTE Unlike in Songs, Scene Track and Tempo Track are not available for Patterns.
NOTE If you are using this instrument with an external sequencer, DAW software, or MIDI device, and you want to synchronize it with
that device, set the “MIDI Sync” parameter in the Utility MIDI display (page 148) to “external” or “auto.” When “MIDI Sync” is set
to “auto” (only when MIDI clock is transmitted continuously) or “external,” the Tempo parameter here indicates “external” and
cannot be changed.
NOTE This parameter can be set also by holding the [SHIFT] button and pressing the [ENTER] button several times repeatedly at the
desired tempo. This function is referred to as “Tap Tempo.”
Meas (Measure)
Determines the measure from which Pattern recording will be started.
In this display you can set the voice related parameters for the recording Track. The settings here affect the Part for
which the receive channel (set in the Mixing mode) matches the transmit (output) channel of the recording Track.
Parameters are the same as in the VOICE display (page 80) in Song Record.
Indicates the Arpeggio Edit display in the Pattern mode. Parameters are the same as in the Arpeggio Edit display (page
82) in the Song mode.
Operation
[PATTERN] Pattern selection [REC]
[F1] SETUP
[F2] VOICE
[F3] ARP ED (Arpeggio Edit)
Knob