Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Remote Mode
Remote display
Remote Control Assignments
134
Remote Control Assignments
Switching the Control Template for the VSTi
To switch the Control Templates of the MOXF6/MOXF8, use the BANK SELECT
[DEC]/[INC] buttons.
Switching the functions of Knobs 1 – 4
Press the Knob Function 1 button to switch the functions assigned to the Knobs 1 – 4 in descending order, “1” | “2” | “3.”
Each function differs depending on the selected Control Template. For details, confirm on the MOXF6/MOXF8 Remote
Editor. The relevant lamp of the functions assigned to the Knobs is turned on. When the functions are shown in the
display, the lamp flashes.
NOTE
Hold down the [SHIFT] button and press Knob Function 1 button to set the functions of Knobs 1 – 4 to “1.”
NOTE Use the MOXF6/MOXF8 Remote Editor to edit the Control Template.
Switching the functions of Knobs 5 – 8
Knobs 5 – 8 are available only when “DAW Select” is set to “Cubase” in the Utility mode. Press Knob Function 2 button
to switch the functions assigned to the Knobs 5 – 8 in descending order, “Q” | “F” | “G.” Knobs 5 – 8 also control the Low,
Low Mid, High Mid, and High bands. This operation is linked with the Track EQ parameter in Cubase. The relevant lamp
of the functions assigned to the Knobs is turned on. When the functions are shown in the display, the lamp flashes.
NOTE
Hold down the [SHIFT] button and press Knob Function 2 button to set the functions of Knobs 5 – 8 to “Q.”
Transport operation
The SEQ TRANSPORT buttons also function as DAW transport controls.
Top (Move to the top of the Song)
Rewind
Forward
Record
Stop
Play