Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Master Mode
Master Play
[F1] PLAY
[F2] MEMORY
[F3] ZONE SW
Master Edit
Common Edit
[F1] NAME
Zone Edit
[F1] TRANS
[F2] NOTE
[F3] TX SW
[F4] PRESET
[F5] KNOB
Master Job
[F1] INIT
[F4] BULK
132
CtrlKnobUp (Control Knob Upper)
CtrlKnobLo (Control Knob Lower)
From this display you can determine which Control Change numbers are used for the Knobs for each Zone. These
settings are available only when the “ZoneKnob” parameter (in the [F3] ZONE SW display in Master Play) is set to “on.”
Settings: off, 1 – 95
Master Job
The Voice Job mode features several basic operations, such as Initialize and Copy. After setting parameters as required
in the selected display, press the [ENTER] button to execute the Job.
This function lets you reset (initialize) all Master parameters to their default settings. It also allows you to selectively
initialize certain parameters, such as Common settings, settings for each Zone, and so on—very useful when creating a
completely new Master from scratch.
Type of parameter to be initialized: All, Common, Zone
This function lets you send all your edited parameter settings for the currently selected Master to a computer or another
MIDI device for data archiving. Press the [ENTER] button to execute the Bulk Dump.
NOTE
In order to execute Bulk Dump, you will need to set the correct MIDI Device Number, with the following operation: [UTILITY]
[F6] MIDI [SF1] CH “DeviceNo.”
[F5] KNOB
[F1] INIT (Initialize)
All All settings for the selected Master are initialized.
Common Common parameter settings for the selected Master are initialized.
Zone The Zone settings are initialized. You can initialize the zone setting to one of the following three types.
Split Splits the keyboard range using Zone 1 and Zone 2. “UpperCh” determines the
MIDI transmit channel of the upper range of the keyboard, “LowerCh” determines
the MIDI transmit channel of the lower range of the keyboard, and “SplitPoint”
determines the note (C2 – G8) number which separates the upper range and lower
ranges of the keyboard.
4Zone Initializes all four Zones.
Layer Lets you layer two parts using Zone 1 and Zone 2. “UpperCh” and “LowerCh”
determine the MIDI transmit channels of the two Zones respectively.
[F4] BULK (Bulk Dump)