Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Voice Mode
Voice Play
[F1] PLAY
[F3] PORTA
[F4] EG
[F5] ARP ED
[F6] EFFECT
Arpeggio Edit
[F2] TYPE
[F3] MAIN
[F4] LIMIT
[F5] PLAY FX
Normal Voice Edit
Common Edit
[F1] GENERAL
[F2] OUTPUT
[F3] EQ
[F4] CTL SET
[F5] LFO
[F6] EFFECT
Element Edit
[F1] OSC
[F2] PITCH
[F3] FILTER
[F4] AMP
[F5] LFO
[F6] EQ
Drum Voice Edit
Common Edit
[F1] GENERAL
[F2] OUTPUT
[F3] EQ
[F4] CTL SET
[F6] EFFECT
Key Edit
[F1] OSC
[F2] PITCH
[F3] FILTER
[F4] AMP
[F6] EQ
Voice Job
[F1] INIT
[F2] RECALL
[F3] COPY
[F4] BULK
Supplementary Information
42
HPFCutoff (High Pass Filter Cutoff Frequency)
Determines the central frequency for the Key Follow parameter (below) of the HPF. When one of the filter types
“LPF12+HPF12” or “LPF6+HPF12” is selected, this parameter is available.
Settings: 0 – 255
HPFKeyFlw (High Pass Filter Cutoff Key Follow)
Sets the Key Follow function for the frequency of the “HPF Cutoff” parameter. This parameter is available only when one
of the filter types “LPF12+HPF12” or “LPF6+HPF12” is selected.
Settings: -200% – +0% – +200%
CenterKey (High Pass Filter Cutoff Key Follow Sensitivity Center Key)
This indicates that the central note for “HPFKeyFlw” above is C3. Keep in mind that this is for display purposes
only; the value cannot be changed.
[SF2] VEL SENS (Velocity Sensitivity)
From this display you can determine how the Filter and the FEG respond to velocity.
EGTime (EG Time Velocity Sensitivity)
Segment (EG Time Velocity Sensitivity Segment)
Determines the velocity sensitivity of the FEG’s Time parameters. Select the Segment, and then set its Time parameter.
Settings: Time: -64 – +0 – +63
Settings: Segment: atk, atk+dcy, dcy, atk+rls, all
atk (attack)...............................EG Time parameter affects Attack time.
atk+dcy (attack + decay)........EG Time Value affects Attack/Decay1 time.
dcy (decay) .............................EG Time parameter affects Decay Time
atk+rls (attack + release)........EG Time Value affects Attack/Release time.
all.............................................EG Time affects all FEG Time parameters.
EGDepth (EG Depth Velocity Sensitivity)
Curve (EG Depth Velocity Sensitivity Curve)
Determines the velocity sensitivity of the FEG Depth parameter.
Settings: EGDepth: -64 – +0 – +63
Settings: Curve: 0 – 4
Cutoff (Cutoff Velocity Sensitivity)
Determines the degree to which velocity affects the Cutoff frequency of the Filter EG.
Settings: -64 – +0 – +63
Resonance (Resonance Velocity Sensitivity)
Determines the degree to which velocity affects the Resonance of the Filter EG.
Settings: -64 – +0 – +63
[SF3] FEG (Filter Envelope Generator)
This allows you to make all the time and level settings for the Filter EG, which determine how the tonal quality of the
sound changes over time. These parameters can be used to control the change in Cutoff Frequency from the moment a
note is pressed on the keyboard to the moment the sound stops. The full names of the available parameters are shown
in the chart below, as they appear in the display.
Settings: TIME: 0 – 127
LEVEL: -128 – +0 – +127
DEPTH: -64 – +0 – +63
NOTE For details on FEG, see the “Synthesizer Parameter Manual” PDF document.
HOLD ATK (Attack) DCY1 (Decay 1) DCY2 (Decay 2) REL (Release) DEPTH
TIME
Hold Time Attack Time Decay 1 Time Decay 2 Time Release Time
LEVEL
Hold Level Attack Level Decay 1 Level Decay 2 Level Release Level Depth