Filter
Top Products
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Mixing Mode
Mixing Play
[F1] VOL/PAN
[F2] VOICE
[F3] EF SEND
[F4] TEMPLATE
[F5] VCE ED
[F6] EFFECT
Mixing Edit
Common Edit
[F1] GENERAL
[F2] MFX
[F3] MEQ
[F4] USB I/O
[F5] A/D IN
[F6] EFFECT
Part Edit
[F1] VOICE
[F2] OUTPUT
[F3] EQ
[F4] TONE
[F5] RCV SW
Mixing Job
[F1] INIT
[F2] RECALL
[F3] COPY
[F4] BULK
Mixing Voice Edit
Common Edit
[F1] GENERAL
[F2] OUTPUT
[F4] CTL SET
[F5] LFO
[F6] EFFECT
Element Edit
[F1] OSC
[F2] PITCH
[F3] FILTER
[F4] AMP
[F5] LFO
[F6] EQ
Mixing Voice Job
[F2] RECALL
[F3] COPY
[F5] DELETE
Supplementary Information
115
From this display you can make basic effect settings for each Part—including Send Level for the System Effects
(Chorus, Reverb,) as well as the Dry Level for Insertion Effects.
NOTE
For information on the effect connections in the Song mode, see page 20.
[SF1] MIX (Mixing)
From this display you can copy the Mixing Template to the Mixing settings of currently edited Part. After selecting a
desired Template, press the [ENTER] button to execute the Copy operation.
NOTE
In addition to the Mixing settings, the tempo setting stored in the Mixing Template will also be automatically loaded.
NOTE For instruction on storing the Mixing settings as a Mixing Template, see page 126.
[SF2] PERFORM (Performance)
This convenient operation lets you copy certain settings of the each Part in a performance to the Mixing program
currently being edited. Press the [ENTER] button to execute the Copy operation.
NOTE
This display is similar to the [SF3] PERFORM display in Mixing Job (page 121). However, this differs from the [SF3] PERFORM
display in two major points:
•All parameters are copied simultaneously.
•The Receive Channel settings are assigned to the destination automatically.
NOTE For those Parts which Part Switch is set to OFF, Receive Channel is also set to OFF.
NOTE In addition to the Part settings, the Arpeggio tempo setting stored in the Performance will also be copied.
Press the [F5] VCE ED button in Mixing Play to enter Mixing Voice Edit. Press the [EXIT] button to return to the original
display. Normal Voices can be edited specifically for use with the Song/Pattern modes, creating a dedicated “Mixing
Voice.” For details, see the “Mixing Voice Edit” on page 122.
Pressing the [F3] EFFECT button in the Mixing mode calls up the [SONG]/[PATTERN] [MIXING] [EDIT]
[COMMON] [F6] EFFECT display in Mixing Edit. From this display, you can set the Effect related parameters for the
current Song/Pattern. For details, see page 116.
[F3] EF SEND (Effect Send)
[F4] TEMPLATE
[F5] VCE ED (Mixing Voice Edit)
[F6] EFFECT