Filter
Top Products
B-1
Catalyst 2960 and 2960-S Switch Software Configuration Guide
OL-8603-09
APPENDIX
B
Supported MIBs
This appendix lists the supported management information base (MIBs) for this release on the
Catalyst 2960 and 2960-S switches. It contains these sections:
• MIB List, page B-1
• Using FTP to Access the MIB Files, page B-4
Note Stacking is supported only on Catalyst 2960-S switches running the LAN base image.
MIB List
• BRIDGE-MIB
Note The BRIDGE-MIB supports the context of a single VLAN. By default, SNMP messages
using the configured community string always provide information for VLAN 1. To obtain
the BRIDGE-MIB information for other VLANs, for example VLAN x, use this community
string in the SNMP message: configured community string @x.
• CISCO-ADMISSION-POLICY-MIB
• CISCO-AUTH-FRAMEWORK-MIB
• CISCO-CABLE-DIAG-MIB
• CISCO-CDP-MIB
• CISCO-CLUSTER-MIB
• CISCO-CONFIG-COPY-MIB
• CISCO-CONFIG-MAN-MIB
• CISCO-ENTITY-VENDORTYPE-OID-MIB
• CISCO-ENVMON-MIB
• CISCO-ERR-DISABLE-MIB
• CISCO-FLASH-MIB (Flash memory on all switches is modeled as removable flash memory.)
• CISCO-FTP-CLIENT-MIB
• CISCO-IETF-IP-MIB