Filter
Top Products
Installation
64
840 USE 106 00 January 2003
Attaching the
Fiber Cable
Clasp to the
Cable
The key to installing the cable is to align the barrel, the locking ring and the
connector, as shown in the diagram below.
Aligning the Key
and Locking
Ring
The table below shows how to align the key and locking ring.
Step Action
1 Turn the locking ring to align an arrow with the key.
2 Then align the key with the keyway. As a result, the locking tab, groove and lock
should also be aligned.
3 Slide the clasp up to the locking ring.
4 Gripping the cable with the clasp, plug the cable into the lower (receive) cable
connector. If it does not connect easily, realign the key with the arrow and try
again.