Filter
Top Products
Using a Quantum IEC Hot Standby System
840 USE 106 00 January 2003 111
7.1 Configuration
Introduction
Purpose This section describes Quantum IEC Hot Standby configuration.
What’s in this
Section?
This section contains the following topics:
Note: To ensure correct operation of the HSBY system, the user must I/O map at
least 1 RIO drop and 1 I/O module. This will ensure the proper diagnostic
information is transferred between Primary and Standby CRPs. (Remote I/O
Processor.)
Topic Page
Loading the Software 112
Controlling the Hot Standby System by Configuration Extension 114