Filter
Top Products
Fiber Optic Cable Guide
214
840 USE 106 00 January 2003
Fiber Optic Cable
Recommen-
dations
Schneider Electric recommends the use of up to 1 km of 62.5/125 graded index,
duplex, multimode glass fiber for all applications. Most 62.5/125 cables are rated at
3.5dB loss per km.
We recommend using a 3 mm diameter cable for your hot Standby system, because
the fiber cable clasps used to maneuver the cable into the ports are designed to be
used with 3 mm cable.
The following cable meets these recommendations.
Connectors You need four ST bayonet-style connectors per cable. Suggested connectors
include:
Termination Kits Suggested kits include:
Vendor Part Number Description
AMP 502086-1 Black
AMP 502908-1 Beige
Vendor Part Number Description
AMP 503571-1 Epoxy, -20 to +75C
AMP 503415-1 Epoxy, -20 to +75C
AMP 501380 Epoxy, -30 to +705C
3M 6105 Epoxy, -40 to +805C
3M 6100 Hot Melt, -40 to +605C
Vendor Part Number Description
AMP 501258-7 Epoxy, 110 Vac, only for AMP
connectors
AMP 501258-8 Epoxy, 220 Vac, only for AMP
connectors
3M 8154 Epoxy, 110 or 220 Vac, only for 3M
connectors
3M 6150 Hot Melt, 110 or 220 Vac, only for 3M
connectors