Filter
Top Products
Installation
840 USE 106 00 January 2003 63
Network
Connections
The following diagram illustrates the network connections.
Installing Coaxial
Cable Link
Connect the fiber link between the Hot Standby modules, making sure the cable is
properly crossed, so that the transmit cable connector of each module is linked to
the receive cable connector of the other. Follow these instructions:
Remove the protective plastic coverings from the cable ports and the tips of the
cable. Snap one of the fiber cable clasps onto the cable, carefully pressing the cable
through the slot so that the wider end of the clasp is closest to the boot.
The following diagram shows the installation of a coaxial cable link.