Filter
Top Products
840 USE 106 00 January 2003 217
C
ProWORX Nxt Configuration
ProWORX Nxt Hot Standby Configuration Extension
Description Use the Hot Standby Configuration Extension dialog to specify Hot Standby
configuration parameters for a Quantum Hot Standby System. It allows the type of
state ram to be transferred between primary and standby PLC, the non-transfer area
(Ver. 2.xx Quantum PLCs with CHS loadable) and the command register. It is
activated from the Network Editor. Select Config Extension on the Configuration
menu and select HSBY Extension from the Tree Control.