Filter
Top Products
Black plate (52,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SSS0640
1. If you must install a booster seat in the
front seat, adjust the seatback so that
it is upright and then move the seat to
the rearmost position. Do not move the
seat with the booster seat attached to
it.
2. Position the booster seat on the seat.
Only place it in a front facing direction.
Always follow the booster seat manu-
facturer’s instructions.
LRS0451
Centerposition
3. The booster seat should be positioned
on the vehicle seat so thatit isstable. If
necessary, adjust or remove the head
restraint to obtain the correct booster
seat fit. (See “HEAD RESTRAINT” earlier
in this section.) If the head restraint is
removed, store it in a secure place. Be
sure to install the head restraint when
the booster seat is removed. If the
seating position does not have a n
adjustable head restraint and it is
interfering with the proper booster seat
fit, try another seating position or a
different booster seat.
LRS0452
Outboardposition
4. Position the lap portion of the seat belt
low and snug on the child’s hips. Be
sure to follow the booster seat manu-
facturer’s instructions for adjusting the
belt routing.
5. Pull the shoulder belt portion of the
seat belt toward the retractor to take up
extra slack. Be sure the shoulder belt is
positioned across the top, middle por-
tion of the child’s shoulder. Be sure to
follow the booster seat manufacturer’s
instructions for adjusting the belt rout-
ing.
1-36 Safety — Seats, seat belts and supplemental restraint system