Filter
Top Products
Black plate (276,1)
Model "S51-D" EDITED: 2008/ 3/ 26
TROUBLESHOOTING GUIDE
The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions.
Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.
Symptom Solution
System fails to interpret the com-
mand correctly.
1. Ensure that the command is valid. (See “LIST OF VOICE COMMANDS” earlier in this section.)
2. Ensure that the command is spoken after the tone.
3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the
vehicle.
4. Ensure that theambient noise level is notexcessive (for example, windows openor defroster on). NOTE: If it is
too noisy to use the phone, it is likely that the voice commands will not be recognized.
5. If more than one command was said at a time, try saying the commands separately.
6. If the system consistently fails to recognize commands, the voice training procedure should be carried out to
improve the recognition response for the speaker. (See “SPEAKER ADAPTATION (SA) MODE” earlier in this
section.)
The system consistently selects the
wrong entry from the phone book.
1. Ensure that the phone book entry name requested matches what was originally stored.This can be confirmed
by using the “List Names” command. (See “PHONE BOOK” earlier in this section.)
2. Replace one of the names being confused with a new name.
4-110 Monitor, climate, audio, phone and voice recognition systems