Filter
Top Products
Black plate (39,1)
Model "S51-D" EDITED: 2008/ 3/ 26
Install the top tether strap as follows:
1. Position the top tether strap over the
top of the head restraint with the head
restraint in the full “down” position.
2. Secure the tether strap to the tether
anchor point on the seat directly
behind the child restraint.
3. Tighten the tether strap according to
the manufacturer’s instructions to re-
move any slack.
For best child restraint fit, see the child
restraint installation instructions in this
section and the child restraint manufac-
turer’s instructions.
If you have any questions when installing
a top tether strap child restraint on the
rear seat, consult your INFINITI dealer for
details.
CHILD RESTRAINT INSTALLATION
USING LATCH
WARNING
. Attach LATCH compatible child restraints
only at the locations shown. For the
LATCH lower anchor locations, see “Low-
er Anchors and Tethers for CHildren
SYSTEM (LATCH)” earlier in this section.
If a child restraint is not secured
properly, your child could be seriously
injured or killed in an accident.
. The LATCH anchors are designed to
withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstance are they to be used for
adult seat belts or harnesses.
. Inspect the lower anchors by inserting
your fingers into the lower anchor area
and feeling to make sure there are no
obstructions over the LATCH anchors,
such as seat belt webbing or seat
cushion material.The child restraint will
not be secured properly if the LATCH
anchors are obstructed.
SSS0645
Frontfacing —step 2
Front-facing
Follow these steps to install a front-facing
child restraint using LATCH:
1. Position the child restraint on the seat.
Always follow the child restraint man-
ufacturer’s instructions.
Safety — Seats, seat belts and supplemental restraint system 1-23