Filter
Top Products
Black plate (134,1)
Model "S51-D" EDITED: 2008/ 3/ 26
need to use a ladder to get up to the
garage door opener motor to be able to
acces s t he “smar t or learn” program
button.
SIC3182
1. To begin, push and hold the 2 outer
HomeLink
®
buttons (to clear the mem-
ory) until the indicator light
*
A
blinks
(after 20 seconds). Release both but-
tons.
2. Position the end of the hand-held
transmitter 1-3 inches away from the
HomeLink
®
surface.
SIC3183
3. Using both hands, simultaneously push
and hold both the HomeLink
®
button
you want to program and the hand-held
transmitter button.
DO NOT release the buttons until step 4
has been completed.
4. Hold down both buttons until the
indicator light on HomeLink
®
flashes,
changing from a “slow blink” to a
“rapid blink”. This could take up to 90
seconds. When the indicator light
blinks rapidly, both buttons may be
released. The rapidly flashing light
indicates successful programming. To
activate the garage door or other
programm ed device, push and hold
2-66 Instruments and controls