Filter
Top Products
Black plate (106,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SIC2941
Be sure not to put anything on top of the
photo sensor
*
A
located on the top of the
instrument panel. The photo sensor con-
trols the autolight; if it is covered, the
photo sensor reacts as if it is dark and the
headlights will illuminate.
SIC3269
Headlight beam select
*
1
To select the low beam, put the lever in
the neutral position as shown.
*
2
To select the high beam, push the lever
forward while the switch is in the
position. Pull it back to select the low
beam.
*
3
Pulling the lever toward you will flash
the headlight high beam even when the
headlight switch is in the OFF position.
Battery saver system
A chime will sound when the driver side
door is opened with the light switch in the
or position and the ignition switch
in the ACC, OFF or LOCK position.
When the headlight switch is in the
or
position while the ignition switch is in
the ON position, the lights will automati-
cally turn off 5 minutes after the ignition
switch has been pushed to the OFF
position.
When the headlight switch remains in the
or position after the lights
automatically turn off, the lights will turn
on when the ignition switch is pushed to
the ON position.
CAUTION
. When you turn on the headlight switch
again after the lights automatically turn
off, the lights will not turn off auto-
matically. Be sure to turn the light
switch to the OFF position when you
leave the vehicle forextended periods of
time, otherwise the battery will be
discharged.
. Never leave the light switch on when the
engine is not running for extended
periods of time even if the headlights
turn off automatically.
2-38 Instruments and controls