Filter
Top Products
Black plate (270,1)
Model "S51-D" EDITED: 2008/ 3/ 26
When prompted by the system, say the
name you would like to give the new entry.
For example, say: “Mary.”
If the name is too long or too short, the
system tells you, then prompts you for a
name again.
Also, if the name sounds too much like a
name already stored, the system tells you,
then prompts you for a name again.
Once the system accepts the name and you
confirm it is correct, the system asks for a
location (Home, Office, Mobile or Other).
For example, say: “Home.”
The system acknowledges the location.
The system will ask you to say a phone
number or to transfer a phone number
stored in the cellular phone’s memory.
To enter a phone number by voice com-
mand:
For example, say: “five five five one two
one two.” (See “How to say numbers”
earlier in this section for more informa-
tion.)
To transfer a phone number stored in the
cellular phone’s memory (if so equipped):
Say “Transfer entry.” The system acknowl-
edges the command and asks you to
initiate the transfer from the phone hand-
set. The new contact phone number will be
transferred from the cellular phone via the
Bluetooth
®
communication link.
The transfer procedure varies according to
each cellular phone. See the cellular phone
Owner’s Manual for details. You can also
visit www.infiniti.com/bluetooth for in-
structions on transferring phone numbers
from INFINITI recommended cellular
phones.
The system repeats the number and
prompts you for the next command. When
you have finished entering numbers,
choose “Store.”
The system confirms the name, location
and number. The system then asks if you
would like to store another location for the
same name. If you do not wish to store
another location, the system ends the VR
session.
“Edit”
Use the Edit command to alter an existing
phone book entry or to add a 2nd, 3rd or
4th phone number to an existing entry.
When prompted by the system, say the
name of the entry you wish to edit.
The system acknowledges the name and
asks you for the location you would like to
edit.
Say the name of the location.
The system acknowledges the location.
The system will ask you to say a phone
number or to transfer a phone number
stored in the cellular phone’s memory.
To enter a phone number by voice com-
mand:
For example, say: “five five five one two
one two.” (See “How to say numbers”
earlier in this section for more informa-
tion.)
To transfer a phone number stored in the
cellular phone’s memory (if so equipped):
Say “Transfer entry.” The system acknowl-
edges the command and asks you to
initiate the transfer from the phone hand-
set. The new contact phone number will be
transferred from the cellular phone via the
Bluetooth
®
communication link.
The transfer procedure varies according to
each cellular phone. See the cellular phone
Owner’s Manual for details. You can also
visit www.infiniti.com/bluetooth for in-
structions on transferring phone numbers
from INFINITI recommended cellular
4-104 Monitor, climate, audio, phone and voice recognition systems