Filter
Top Products
Black plate (133,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SIC2925
When the switch is in the DOOR position
*
A
, the light illuminates while the lift gate
is opened. When the lift gate is closed, the
light will turn off.
When the switch is in the OFF position
*
B
,
the light will turn off.
The light will turn off after 30 minutes
when the lights remain illuminated to
prevent the battery from becoming dis-
charged.
HomeLink
®
Universal Transceiver provides
a convenient way to consolidate the func-
tions of up to three individual hand-held
transmitters into one built-in device.
HomeLink
®
Universal Transceiver:
. Will operate most Radio Frequency (RF)
devices such as garage doors, gates,
home and office lighting, entry door
locks and security systems.
. Is powered by your vehicle’s battery.
No separate batteries are required. If
the vehicle’s battery is discharged or is
disconnected, HomeLink
®
will retain all
programming.
Once HomeLink
®
Universal Transceiver is
programmed, retain the original transmit-
ter for future programming procedures
(Example: new vehicle purchases). Upon
sale of the vehicle, the program med
HomeLink
®
Universal Transceiver buttons
should be erased for security purposes.
For additional information, see “PR O-
GRAMMING HomeLink
®
” later in this sec-
tion.
WARNING
. Do not use HomeLink
®
Universal Trans-
ceiver with any garage door opener that
lacks safety stop and reverse featuresas
required by federal safety standards.
(These standards became effective for
opener models manufactured after April
1, 1982.) A garage door opener which
cannot detect an object in the path of a
closing garage door and then automati-
cally stop and reverse, does not meet
current federal safety standards. Using
a garage door opener without these
features increases the risk of serious
injury or death.
. During programming procedure, your
garage door or security gate may open
or close. Make sure that people and
objects are clear of the garage door,
gate, etc. that you are programming.
. Your vehicle’s engine should be turned
off while programming HomeLink
®
Uni-
versal Transceiver.
PROGRAMMING HomeLink
®
To program your HomeLink
®
Transceiver to
operate a garage door, gate, or entry door
opener, home or office lighting, you need
to be at the same location as the device.
Note: Garage door openers (manufactured
after 1996) have “rolling code protection”.
To program a garage door opener equipped
with “rolling code protection”; you will
CARGO LIGHT HomeLink
®
UNIVERSAL TRANSCEIVER
Instruments and controls 2-65