Filter
Top Products
Black plate (191,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SAA1980
Backing up behind a projecting
object
The position
*
C
is shown fur ther than the
position
*
B
in the display. However, the
position
*
C
is actually at the same
distance as the position
*
A
. The vehicle
may hit the object when backing up to the
position
*
A
if the object projects over the
actual backing up course.
HOW TO ADJUST THE SCREEN
To adjust the Display ON/OFF, Brightness,
Tint, Color, Contrast and Black Level of the
RearView Monitor, push the SETTING but-
ton with the RearView Monitor on, select
the item key and adjust the level using the
INFINITI controller.
Do not adjust the Brightness, Tint, Color,
Contrast and Black Level of the RearView
Monitor while the vehicle is moving. Make
sure the parking brake is firmly applied
and the engine is not running.
OPERATING TIPS
. When the selector lever is shifted to the
R (Reverse) position, the monitor
screen automatically changes to the
RearView Monitor mode. However, the
radio can be heard.
. It may take some time until the Rear-
View Monitor or the normal screen is
displayed after the selector lever has
been shifted to R from another position
or to another position from R. Objects
may be distorted momentarily until the
RearView Monitor screen is displayed
completely.
. When the temperature is extremely
high or low, the screen may not clearly
display objects. This is not a malfunc-
tion.
. When strong light directly enters the
camera, objects may not be displayed
clearly. This is not a malfunction.
. Vertical lines may be seen in objects on
thescreen.Thisisduetostrong
reflected light from the bumper. This
is not a malfunction.
. The screen may flicker under fluores-
cent light. This is not a malfunction.
. The colors of objects on the RearView
Monitor may differ somewhat from
those of the actual object.
. Objects on the monitor may not be
clear in a dark place or at night. This is
not a malfunction.
. If dirt, rain or snow attaches to the
camera, the RearView Monitor may not
clearly display objects. Clean the cam-
era.
. Do not use alcohol, benzine or thinner
to clean the camera. This will cause
discoloration. To clean the camera,
wipe with a cloth dampened with
diluted mild cleaning agent and then
Monitor, climate, audio, phone and voice recognition systems 4-25