Filter
Top Products
Black plate (176,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SAA1450
Tire Pressure information
The tire pressure will be displayed for
reference.
The pressure indication “** psi” on the
screen means that the tire pressure is
being measured. After a few driving trips,
the pressure for each tire will be displayed.
In case of low tire pressure, LOW PRES-
SURE information will be displayed on the
screen. Check the pressure for all tires.
Tire pressure rises and falls depending on
the heat caused by the vehicle’s traveling
condition and the temperature.
After tire rotation is performed, tire pres-
sure will not be displayed in the actual tire
position. Drive the vehicle at over 25 MPH
(40 km/h) for approximately 10 minutes to
reset the display.
For additional information, see “Low tire
pressure warning light” in the “2. Instru-
ments and controls” section and “TIRE
PRESSURE MONITORING SYSTEM (TPMS)”
in the “6. In case of emergency” section.
WARNING
. When a spare tire is mounted or a wheel
is replaced, tire pressure will not be
indicated, the TPMS will not function
and the low tire pressure warning light
will flash for approximately 1 minute.
The light will remain on after 1 minute.
Contact your INFINITI dealer as soon as
possible fo r tire repla cement and/or
system resetting.
. Replacing tires with those not originally
specified by INFINITI could affect the
proper operation of the TPMS.
SAA1554
Maintenance information
To set the maintenance interval for Remin-
ders 1 to 4, choose an item using the
INFINITI controller and push the ENTER
button.
You can also set to display a message to
remind you that the maintenance needs to
be performed.
The following example shows how to set
Reminder 1. Use the same steps to set the
other maintenance information.
4-10 Monitor, climate, audio, phone and voice recognition systems