Filter
Top Products
Black plate (19,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SSS0834
Forward and backward:
Moving the switch
*
1
forward or backward
will slide the seat forward or backward to
the desired position.
Reclining:
Move the recline switch
*
2
backward until
the desired angle is obtained. To bring the
seatback forward again, move the switch
*
2
forward.
The reclining feature allows adjustment of
the seatback for occupants of different
sizes for added comfort and to help obtain
proper seat belt fit. (See “PRECAUTIONS
ON SEAT BELT USAGE” later in this section.)
Also, the seatback can be reclined to allow
occupants to rest when the vehicle is
parked.
WARNING
The seatback should not be reclined any
more than needed for comfort. Seat belts
are most effective when the passenger sits
well back and straight up in the seat. If the
seatback is reclined, the risk of sliding
under the lap belt and being injured is
increased.
SSS0835
Seat lifter:
Push the front or rear end of the switch up
or down to adjust the angle or height of the
seat.
Safety — Seats, seat belts and supplemental restraint system 1-3