Filter
Top Products
Black plate (277,1)
Model "S51-D" EDITED: 2008/ 3/ 26
INFINITI Voice Recognition allows hands-
free operation of the systems equipped on
this vehicle in one of two modes, Standard
Mode or Alternate Command Mode. In
Standard Mode, you can operate phone
and vehicle information. Commands that
are available are always shown on the
display and announced by the system. You
can complete your desired operation by
simply following the prompts given by the
system. In this mode, hands-free operation
of Audio, Climate Control and Display is
not available through INFINITI Voice Recog-
nition.
For advanced operation, you can change to
Alternate Command Mode that enables the
operation of the display, audio, and
climate control through INFINITI Voice
Recognition. When this mode is active, an
expanded list of commands can be spoken
after pushing the TALK
switch, and the
voice command menu prompts are turned
off. Note that in this mode the recognition
success rate may be affected as the
number of available commands and the
ways of speaking each command are
increased. (See “INFINITI VOICE RECOGNI-
TION ALTERNATE COMMAND MODE” later in
this section for details about Alternate
Command Mode.)
To improve the recognition success rate
when Alternate Command Mode is active,
try using the Speaker Adaptation Function
available in that mode. (See “SPEAKER
ADAPTATION FUNCTION” later in this sec-
tion.) Otherwise, it is recommended that
Alternate Command Mode be turned off
and Standard Mode be used for the best
recognition performance.
For the voice commands for the navigation
system, refer to the Navigation System
Owner’s Manual of your vehicle.
SAA2147
INFINITI VOICE RECOGNITION STAN-
DARD MODE
Activating Standard Mode
1. Push the SETTING buttononthe
instrument panel.
2. High light the “Others” key on th e
display and then push the ENTER
button.
3. Highlight the “Voice Recognition” key
and then push the ENTER button.
INFINITI VOICE RECOGNITION SYSTEM
(models with navigation system)
Monitor, climate, audio, phone and voice recognition systems 4-111