Filter
Top Products
Black plate (109,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SIC3830
Instrument brightness control
The instrument brightness control switch
can be operated when the ignition switch
is in the ON position. When the switch is
operated, the dot matrix liquid cr ystal
display switches to the brightness adjust-
ment mode.
Push the upper switch
*
A
to brighten the
instrument panel lights. The bar
*
1
moves
to the + side. When reaching the maximum
brightness, “MAX” appears on the display
*
2
.
Push the lower switch
*
B
to dim the
instrument panel lights. The bar
*
1
moves
to the − side. When reaching the minimum
brightness, “MIN” appears on the display
*
3
. However, “ MIN” does not appear
during the nighttime.
The dot matrix liquid crystal display
returns to the normal display under the
following conditions:
. when the instrument brightness control
switch is not operated for more than 5
seconds.
. when the
or switch on the
right side of the combination meter
panel is pushed.
SIC3271
TURN SIGNAL SWITCH
*
1
Turn signal
Move the lever up or down to signal the
turning direction. When the turn is com-
pleted, the turn signals cancel automati-
cally.
*
2
Lane change signal
To indicate a lane change, move the lever
up or down to the point where lights begin
flashing.
Instruments and controls 2-41