Filter
Top Products
Black plate (431,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SPA1875
Replace the battery as follows:
1. Release the lock knob at the back of the
Intelligent Key and remove the mechan-
ical key.
2. Insert a flat-blade screwdriver
*
A
wrapped with a cloth into the slit
*
B
of the corner and twist it to separate
the upper part from the lower part.
SDI2285
3. Replace the battery with a new one.
Recommended battery: CR2032 or
equivalent.
. Do not touch the internal circuit and
electric terminals as it could cause a
malfunction.
. Hold the battery by the edges.
Holding the batter y across the
contact points will seriously deplete
the storage capacity.
. Make sure that the + side faces the
bottom of the case.
4. Align the tips of the upper and lower
parts, and then push them together
until it is securely closed.
5. Push the buttons two or three times to
check its operation.
See an INFINITI dealer if you need any
assistance for replacement.
FCC Notice:
This equipment has been tested and found
to comply with the limits for a Class B
digital device pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential in-
stallation. This equipment generates, uses
and can radiate radio frequency energy
and, if not installed and used in accor-
dance with the instructions, may cause
harmful interference to radio communica-
tions. However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user
is encouraged to try to correct the inter-
ference by one or more of the following
measures:
— Re orient or relocate the receiving
antenna
— Increase the separation between the
INTELLIGENT KEY BATTERY REPLACEMENT
Maintenance and do-it-yourself 8-25