Filter
Top Products
Black plate (41,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SSS0638
Frontfacing —step 6
6. Before placing the child in the child
restraint, hold child restraint near the
LATCH attachment and use force to
push the child restraint from side to
side, and tug it forward to make sure
that it is securely held in place. It
should not move more than 1 in (25
mm). If it does move more than 1 in (25
mm), pull again on the anchor attach-
ments to further tighten the child
restraint. If you are unable to properly
secure the restraint, move the restraint
to another seating position and try
again, or try a different child restraint.
Not all child restraints fit in all types of
vehicles.
7. Check to make sure the child restraint
is properly secured prior to each use. If
the child restraint is loose, repeat steps
3 through 6.
SSS0648
Rear facing —step2
Rear-facing
Follow these steps to install a rear-facing
child restraint using LATCH:
1. Position the child restraint on the seat.
Always follow the child restraint man-
ufacturer’s instructions.
Safety — Seats, seat belts and supplemental restraint system 1-25