Filter
Top Products
Black plate (330,1)
Model "S51-D" EDITED: 2008/ 3/ 26
accidents or to control the vehicle’s
speed in emergency situations. Do not
use cruise control except in appropriate
road and traffic conditions.
. In the conventional (fixed speed) cruise
control mode, a warning chime will not
sound to warn youif you are too close to
the vehicle ahead. Pay special attention
to the distance between your vehicle
and the vehicle ahead of you or a
collision could occur.
SSD0737
1. Vehicle-to-vehicle distance control
mode
2. Conventional (fixed speed) cruise con-
trol mode
Push the MAIN switch
*
A
to choose the
cruise control mode between the vehicle-
to-vehicle distance control mode
*
1
and
the conventional (fixed speed) cruise con-
trol mode
*
2
.
To choose the vehicle-to-vehicle distance
control mode
*
1
, quickly push and release
the MAIN switch
*
A
. To choos e the
conventional (fixed speed) cruise control
mode
*
2
, push and hold the MAIN switch
*
A
for longer than approximately 1.5
seconds.
Once a control mode is activated, it cannot
be changed to the other cruise control
mode. To change the mode, push the MAIN
switch once to turn the system off. Then
push the MAIN switch again to turn the
system back on and select the desired
cruise control mode.
Always confirm the setting in the Intelligent
Cruise Control system display.
For the vehicle-to-vehicle distance control
mode, see the following description. For
the conventional (fixed speed) cruise con-
trol mode, see page 5-46.
5-28 Starting and driving