Filter
Top Products
Black plate (42,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SSS0649
Rear facing —step2
2. Secure the child restraint anchor at-
tachments to the LATCH lower anchors.
Check to make sure the LATCH attach-
ment is properly attached to the lower
anchors.
SSS0639
Rear facing —step3
3. For child restraints that are equipped
with webbing mo unted attachments,
remove any additional slack from the
anchor attachments. Press downward
and rearward firmly in the center of the
child restraint with your hand to com-
press the vehicle seat cushion and
seatback while tightening the webbing
of the anchor attachments.
SSS0650
Rear facing —step4
4. Before placing the child in the child
restraint, hold the child restraint near
the LATCH attachment and use force to
push the child restraint from side to
side, and tug it forward to make sure
that it is securely held in place. It
should not move more than 1 in (25
mm). If it does move more than 1 in (25
mm), pull again on the anchor attach-
ments to further tighten the child
restraint. If you are unable to properly
secure the restraint, move the restraint
to another seating position and try
again, or try a different child restraint.
Not all child restraints fit in all types of
vehicles.
1-26 Safety — Seats, seat belts and supplemental restraint system