Filter
Top Products
Black plate (45,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SSS0651
Frontfacing —step 4
4. Pull the shoulder belt until the belt is
fully extended. At this time, the seat
belt retractor is in the Automatic Lock-
ing Retractor (ALR) mode (child restraint
mode). It reverts to Emergency Locking
Retractor (ELR) mode when the seat belt
is fully retracted.
SSS0652
Frontfacing —step 5
5. Allow the seat belt to retract. Pull up on
the shoulder belt to remove any slack
in the belt.
SSS0653
Frontfacing —step 6
6. Remove any additional slack from the
seat belt; press downward and rear-
ward firmly in the center of the child
restraint with your knee to compress
the vehicle seat cushion and seatback
while pulling up on the seat belt.
7. If the child restraint is equipped with a
top tether strap, route the top tether
strap and secure the tether strap to the
tether anchor point (rear seat installa-
tion only). (See “TOP TETHER STRAP
CHILD RESTRAINT” earlier in this sec-
tion.) Do not install child restraints
equipped with a top tether strap to
seating positions that do not have a top
tether anchor.
Safety — Seats, seat belts and supplemental restraint system 1-29