Filter
Top Products
Black plate (162,1)
Model "S51-D" EDITED: 2008/ 3/ 26
1. Push the ignition switch to the ON
position.
2. Move the selector lever to the R
(Reverse) position.
3. Choose the right or left outside mirror
by operating the outside mirror control
switch.
4. The selected outside mirror surface
moves downward.
When one of the following conditions has
occurred, the selected outside mirror sur-
face will return to its original position.
. The selector lever is moved to any
position other than R (Reverse).
. The outside mirror control switch is set
to the center position.
. The ignition switch is pushed to the OFF
position.
SIC3869
VANITY MIRROR
To use the front vanity mirror, pull down
the sun visor and pull up the cover.
The automatic drive positioner system has
three features:
. Entry/exit function
. Seat synchronization function
. Memory storage
ENTRY/EXIT FUNCTION
This system is designed so that the driver’s
seat and steering column will automati-
cally move when the automatic transmis-
sion selector lever is in the P (Park)
position. This allows the driver to get into
and out of the driver’s seat more easily.
The driver’s seat will slide backward and
the steering wheel will move up when the
driver’s door is opened with the ignition
switch in the OFF position.
The driver’s seat and steering wheel will
return to the previous positions when one
of the following is operated:
. When the ignition switch is pushed to
the ACC position after the driver’s door
is closed.
. When the ignition switch is pushed to
the ON position.
The driver’s seat will not return to the
previous positions if the seat or steering
AUTOMATIC DRIVE POSITIONER (if so
equipped)
3-24 Pre-driving checks and adjustments