Filter
Top Products
Black plate (367,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SSD0738
SSD0749
Vehicle aheaddetection indicator light
The IBA system uses a distance sensor
*
A
located below the front bumper to measure
the distance to the vehicle ahead. When
the system judges that your vehicle is
getting close to the vehicle ahead in the
traveling lane, the vehicle ahead detection
indicator light on the instrument panel
blinks and a warning chime sounds.
The IBA system will be turned on/off by
pushing the IBA OFF switch. The IBA OFF
indicator light display will illuminate when
the system is turned off.
PRECAUTIONS ON IBA SYSTEM
WARNING
. The IBA system is not a collision
avoidance system. It is the driver’s
responsibility to stay alert, drive safely
and be in control of the vehicle at all
times.
. As there is a performance limit, the
system may not provide a warning or
braking in certain conditions.
. The system will not detect the following
objects:
— Pedestrians, animals or obstacles in
the roadway
— Oncoming vehicles in the same lane
. The system will not detect another
vehicle under the following conditions:
— When the sensor gets dirty and it is
impossible to detect the distance
from the vehicle ahead.
— When driving into a strong light (i.e.,
sunlight)
. The sensor generally detects the signals
returned from the reflectors on a vehicle
ahead. Therefore, the system may not
function properly under the following
conditions:
— When the reflectors of the vehicle
ahead are positioned high or close to
each other (including a small vehicle
such as motorcycles).
— When the sensor gets dirty and it is
impossible to detect the distance
from the vehicle ahead.
— When the reflectors on the vehicle
ahead are missing, damaged or cov-
ered.
— When the reflectors of the vehicle
ahead are covered with dirt, snow or
road spray.
— When visibility is low (such as rain,
fog, snow, etc.).
Starting and driving 5-65