Filter
Top Products
Black plate (221,1)
Model "S51-D" EDITED: 2008/ 3/ 26
. ANTENNA ERROR (Antenna connection
error)
. LOADING (When the initial setting is
performed)
. UPDATING (When the satellite radio
subscription is not active)
. INVALID CH (Invalid station is received.)
SCAN tuning:
Push the SCAN tuning button to tune from
low to high frequencies and stops at each
broadcasting station for 5 seconds. Push-
ing the button again during this 5 seconds
period will stop SCAN tuning and the radio
will remain tuned to that station.
If the SCAN tuning button is not pushed
within 5 seconds, SCAN tuning moves to
the next station.
PRESET select:
Push the PRESET select button to go to the
next PRESET. After choosing from the
PRESET A, B or C, you can select the
desired station using the INFINITI controller
or pushing the station preset buttons
*
1
to
*
6
.
*
1
to
*
6
Station memory operations:
Six stations can be set for PRESET A, B and
C. The PRESET A, B and C function allows
you to store a combination of FM, AM and
XM stations for easy access.
1. Choose preset station A, B or C using
the preset select button.
2. Tune to the desired station using the
SEEK, SCAN or TUNE button.
3. Select the desired station and keep
pushing any of the desired stat ion
preset buttons
*
1
to
*
6
until a beep
sound is heard. (The radio mutes when
the select button is pushed.)
4. The station indicator will then illumi-
nateandthesoundwillresume.
Memorizing is now complete.
5. Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if
the fuse blows, the radio memory will be
erased. In that case, reset the desired
stations.
Text:
When the “Text” key is selected with the
INFINITI controller on the display and then
the ENTER button is pushed while the
satellite radio is being played, the text
information will be displayed on the
screen.
. CH Name
. Category
. Name
. Title
. Other
Compact Disc (CD) player/changer
operation
Push the ignition switch to the ACC or ON
position, push the LOAD button (if so
equipped) and insert the compact disc into
the slot with the label side facing up. The
compact disc will be guided automatically
into the slot and start playing.
After loading the disc, the number of tracks
on the disc and the play time will appear
on the display.
If the radio is already operating, it will
automatically turn off and the compact disc
will play.
If the system has been turned off while the
compact disc was playing, pushing the
ON·OFF/VOL control knob will start the
compact disc.
Monitor, climate, audio, phone and voice recognition systems 4-55