Filter
Top Products
Black plate (26,1)
Model "S51-D" EDITED: 2008/ 3/ 26
. Do not wear the seat belt inside out or
twisted. Doing so may reduce its effec-
tiveness.
. Do not allow more than one person to
use the same seat belt.
. Never carry more people in the vehicle
than there are seat belts.
. If the seat belt warning light glows
continuously while the ignition is turned
ON with all doors closed and all seat
belts fastened, it may indicate a mal-
function in the system. Have the system
checked by an INFINITI dealer.
. No changes should made to the seat
belt system. For example, do not modify
the seat belt, add material, or install
devices that may change the seat belt
routing or tension. Doing so may affect
the operation of the seat belt system.
Modifying or tampering with the seat
belt system may result in ser ious
personal injury.
. Once a seat belt pretensioner has
activated, it cannot be reused and must
be replaced together with the retractor.
See an INFINITI dealer.
. Removal and installation of preten-
sioner system components should be
done by an INFINITI dealer.
. All seat belt assemblies, including
retractors and attaching hardware,
should be inspected after any collision
by an INFINITI dealer. INFINITI recom-
mends that all seat belt assemblies in
use during a collision be replaced
unless the collision was minor and the
belts show no damage and continue to
operate properly.
Seat belt assemblies not in use during a
collision should also be inspected and
replaced if either damage or improper
operation is noted.
. All child restraints and attaching hard-
ware should be inspected after an y
collision. Always follow the restraint
manufacturer’s inspection instructions
and replacement recommendations. The
child restraints should be replaced if
they are damaged.
SSS0016
SSS0014
1-10 Safety — Seats, seat belts and supplemental restraint system