Filter
Top Products
Black plate (319,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SSD0775
Shift lock release
If the battery charge is low or discharged,
the selector lever may not be moved from
the P (Park) position even with the brake
pedal depressed and the selector lever
button pushed.
To move the selector lever, perform the
following procedure:
1. Push the ignition switch to the OFF or
LOCK position.
2. Apply the parking brake.
3. Remove the shift lock cover
*
A
using a
suitable tool.
4. Push down the s hift lock
*
B
as
illustrated.
5. Push the selector lever button
*
C
and
move the selector lever to N (Neutral)
position
*
D
while holding down the
shift lock.
Push the ignition switch to the ON position
to unlock the steering wheel. Now the
vehicle may be moved to the desired
location.
If the battery is discharged completely, the
steering wheel cannot be unlocked. Do not
move the vehicle with the steering wheel
locked.
If the lever cannot be moved out of P
(Park), have an INFINITI dealer check the
automatic transmission system as soon as
possible.
WARNING
. Be sure the parking brake is fully
released before driving. Failure to do
so can cause brake failure and lead to an
accident.
. Do not release the parking brake from
outside the vehicle.
. Do not use the gear shift in place of the
parking brake. When parking, be sure
the parking brake is fully engaged.
. Do not leave children unattended in a
vehicle. They could release the parking
brake and cause an accident.
PARKING BRAKE
Starting and driving 5-17