Filter
Top Products
Black plate (339,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SSD0741
To set cruising speed, accelerate your
vehicle to the desired speed, push the
SET/COAST switch and release it. (Vehicle
ahead detection indicator, set di stance
indicator and set vehicle speed indicator
come on.) Take your foot off the accelerator
pedal. Your vehicle will maintain the set
speed.
SSD0784
When the SET/COAST switch is pushed
under the following conditions, the system
cannot be set and the ICC indicators will
blink for approximately 2 seconds:
. When traveling below 20 MPH (32
km/h) and the vehicle ahead is not
detected
. When the selector lever is not in the D,
DS or Manual mode
. When the windshield wipers are oper-
ating at low (LO) or high speed (HI). If
the vehicle is equipped with a rain-
sensing auto wiper, the system may
cancel when the wipers are operating at
the intermittent (INT) speed.
. When the parking brake is applied
. When the brakes are operated by the
driver
Starting and driving 5-37