Filter
Top Products
Black plate (343,1)
Model "S51-D" EDITED: 2008/ 3/ 26
one of the following methods:
. Lightly tap the brake pedal. When the
vehicle attains the desired speed, push
the SET/COAST switch and release it.
. Push and hold the SET/COAST switch.
The set vehicle speed will decrease by
approximately 5 MPH (5 km/h for
Canada).
. Push, then quickly release the SET/
COAST switch. Each time you do this,
the set speed will decrease by approxi-
mately 1 MPH (1 km/h for Canada).
To resume the preset speed, push and
release the RESUME/ACCELERATE switch.
The vehicle will re sume the last set
cruising speed when the vehicle speed is
over 20 MPH (32 km/h).
SSD0742
How to change the set distance to
the vehicle ahead
The distance to the vehicle ahead can be
selected at any time depending on the
traffic conditions.
Each time the D ISTANCE switch
*
A
is
pushed, the set distance will change to
long, middle, short and back to long again
in that sequence.
Starting and driving 5-41