Filter
Top Products
Black plate (273,1)
Model "S51-D" EDITED: 2008/ 3/ 26
then ends the VR session.
“Select Phone”
Use the Select Phone command to select a
phone of lesser priority when two or more
phones paired with Bluetooth
®
Hands-Free
Phone System are in the vehicle at the
same time.
The system asks you to name the phone
and confirm the selection.
Once the selection is confirmed, the
selected phone remains active until the
ignition switch is turned OFF or you select a
new phone.
“Change Priority”
Use the Change Priority command to
change the priority level of the active
phone.
The priority level determines which phone
is active when more than one paired
Bluetooth
®
phone is in the vehicle.
The system states the priority level of the
active phone and asks for a new priority
level (1, 2, 3, 4, 5).
If the new priority level is already being
used for another phone, the two phones
will swap priority levels.
For example, if the current priority levels
are:
Priority Level 1 = Phone A
Priority Level 2 = Phone B
Priority Level 3 = Phone C
and you change the priority level of Phone
C to Level 1, then:
Priority Level 1 = Phone C
Priority Level 2 = Phone B
Priority Level 3 = Phone A
“Delete Phone”
Use the Delete Phone command to delete a
specific phone or all phones from the
Bluetooth
®
Hands-Free Phone System.
The system announces the names of the
phones already paired with the system and
their priority level. The system then gives
you the option to delete a specific phone,
all phones or listen to the list again.
Once you choose to delete a phone or all
phones, the system asks you to confirm
this action.
NOTE:
When you delete a phone, the associated
phone book for that phone will also be
deleted.
SPEAKER ADAPTATION (SA) MODE
Speaker Adaptation allows up to two out-of
dialect users to train thesystem to improve
recognition accuracy. By repeating a num-
ber of commands, the users can create a
voice model of their own voice that is
stored in the system. The system is
capa ble of storing a different speaker
adaptation model for memor y A and
memory B.
If memory A is available, the system will
use mem ory A to store the model. If
memory A is in use and memory B is
available, the system will use memory B to
store the model. If both of the memory
locations are in use, the system will ask
the user to select which memory location
should be overwritten.
Training procedure
The procedure for training a voice is as
follows.
1. Position the vehicle in a reasonably
quiet outdoor location.
2. Sit in the driver’s seat with the engine
running, the parking brake on, and the
transmission in the P (Park) position.
3. Press and hold the
button for more
than 5 seconds.
Monitor, climate, audio, phone and voice recognition systems 4-107