Filter
Top Products
System Test 24-Hour Zone
Transmitters
RF
Scanner
1.
Trip each 24-Hour zone transmitter (tire, panic, auxiliary,
environmental).
2.
Listen for the appropriate alarm sounding patterns from
the Central Controller.
3.
Reset the alarm system (disarm or cancel).
4.
Press
the Messages key on the Central Controller to verify
that the proper signals were received.
5.
Call the Central Station to verify that the proper
channel
and account code were received.
Refer to TECH
TIPS,
Volume I, Number 4, page 2 for information
about testing with
an RF
Scanner.
AT&T Proprietary Information
2-76