Filter
Top Products
7.
Perform the sensor activation RF test.
a.
Activate the sensor.
b.
Listen for the proper number of beeps from the
Central
ControIIer.
C.
Check the Central Controller to
verify
that the
proper transmitter I.D. number appears.
d.
Check the status LEDs on the Central Controller
for more information.
Mount Universal Transmitter
1.
Mount the sensor to be used with the transmitter.
Follow the sensor manufacturer’s instructions.
2.
Thread sensor wires through the Universal Transmitter
backplate or choose portable backplate for hand-held use.
AT&T Proprietary
Information
2-67