Filter
Top Products
STEP
18
Mount the
Transmitters
Mount
Wireless
Remote/Transmitter
1.
Mount the sensor to be used with the transmitter. (Follow
the sensor manufacturer’s instructions.)
2.
Thread sensor wires through the Wireless
Remote/Transmitter
backplate.
Too much wire
can
cause the
housing to seat improperly and
cause false alarms.
3.
Mount the backplate.
Be careful not to over-tighten the backplate screws. False
alarms may result because the housing seats improperly
against the tamper switch.
AT&T
Proprietary
Information
2-64