Filter
Top Products
STEP
14
Run the Phone Line for the Digital
Communicator
1.
2.
Locate the phone line protector block.
Install
an
RJ3lX block. do not mount the RJ3lX inside of
the Central Controller.
Follow all manufactured installation procedures.
3.
possible, to the phone protector block and attach at both
ends.
4.
Attach connecting cord from the Digital Communicator to
the
RJ3lX
block.
NOTE: Utilize the tamper facility on the RJ3lX to protect the
digital communicator connecting cord from being
unknowingly
disconnected. Wiie the tamper sensor to the Central Controller
hardwired loop screw terminals.
5.
Test the customer's phones foi proper operation.
NOTE: If the customer’s phones are not operating properly, refer
to the manufacturer installation instructions for the RJ3lX block
and the digital communicator.
AT&T Proprietary Information
2-38