Filter
Top Products
Switch 8
sets the transmitter sensor zone to either of
the following:
ON =
interior
OFF = perimeter instant
Stitches 9
-
12
should be set to the ON position.
pscH8$E
TRANSMITTER
DIP
SWITCHES
l
"Active” Post on PIRT
Circuit
Board
6.
Test the battery voitage. It should be 9 volts. Connect the
batteries. Check the current draw.
7.
Log
the
transmitter on the Central Controller Zone
Locator Card.
AT&T
Proprietary
information
2-59