Filter
Top Products
STEP 9
Power Up the
Central
Controller
Attach the
Central
Controllet
antenna
to
the
transfomer
Plug in the
Transformer
Verify
power
CAUTION: BEFORE
YOU POWER UP, PROGRAM AT LEAST
ONE WIRELESS REMOTE/TRANSMITTER SO YOU CAN
IMMEDIATELY ENTER THE
INSTALLER TEST MODE.
Use only a 16 VAC transformer, Comcode number 845402734.
Plug the transformer into the
120
VAC, 60 Hz, wall outlet and
secure to the
waII
using the 6-32 screw provided.
CAUTION: The transformer is fused, so be careful not to short
’
the leads.
NOTE: Do not plug the transformer into an outlet that is
controlled by a
waII
switch.
Verify that the Central Controller is receiving AC power by
checking to see that:
.
The AC Power LED is
on.
.
Two dashes
(-
-) appear in the digital display.
AT&T Proprietary Information
2-26