Filter
Top Products
Mount
Keypad
Transmitter
7.
Perform the sensor activation RF test.
This test is used to verify the correct functioning of the
sensor and the RF link of the mounted transmitter.
a.
Activate
the
sensor.
b.
Listen for the proper number of beeps from the
Central Controller.
c.
Check the Central Controller to verify that the
proper transmitter I.D. number appears.
d.
Check the status
LEDs
on the Central Controller
for more information.
1.
Mount the sensor to be used
with
the transmitter.
Follow the sensor manufacturer’s instructions.
2.
Thread sensor wires
through
the Keypad Transmitter
backplate.
3.
Mount the backplate.
Be careful not to over-tighten the backplate screws.
4.
Connect sensor wires to the screw terminals on the
backplate for the desired type of sensor loop.
5.
Connect the snap caps or spade lug wires to the screw
terminals.
6.
Attach the front
housing.
AT&T Proprietary
Information
2-66