Filter
Top Products
3.
Test the voltage of your
9-volt
battery. Connect the
battery. Check the current draw.
4. Log
the transmitter location on the
Central
Controller
Zone Locator Card.
5.
Temporarily place the transmitter in the area that it will
be mounted. Use double-sided tape, if necessary.
6.
Perform the Universal Transmitter RF link test.
a.
Use a pencil to press the Alarm/Test button.
b.
Listen for the proper number of indication beeps
from the Central Controller.
C.
Check the Central Controller to verify that the
proper
transmitter
ID number appears.
d.
Check the status LEDs on the Central Controller
for more information.
AT&T
Proprietary Information
2-56