Filter
Top Products
Switches 10 and 11 set the type of alarm that
the transmitter
will
send. Use the chart below
to set the transmitter to Intrusion, Fire,
Auxiliary, or Environmental.
Switch
12
determines whether or not the
transmitter is supervised. A supervised
transmitter checks in to the central Controller.
An unsupervised transmitter doesn’t check in,
thus it can be taken off of the premises with out
causing a
"no
check in”.
ON =
supervised
OFF
=
unsupervised
Type
Of
Alarm
Dip
Switch Settings
10
11
I
Intrusion ON ON
I
Fire
OFF ON
Auxiliary
ON
OFF
Environmental
OFF OFF
Universal
Transmitter
Alarm
Settings
AT&T Proprietary Information
2-55