Filter
Top Products
STEP 21
Perform the System Test
System Test Intrusion Transmitters
1. Arm the system to the Away ststate using a wireless
Remote/Transmitter.
2.
Trip each intrusion transmitter.
3.
Listen for the appropriate alarm sounding patterns from the
the Central Controller.
4.
Use the Wireless Remote/Transmitter to disarm the
system.
5.
Press the Messages key on the Central Controller to verify
that the proper signals were received.
6.
Call the Central Station to verify
and account code were received.
System Test
Hardwired 1. Arm the System
2. Trip each hardwired loop sensor.
that the proper channel
3.
Listen for the appropriate alarm from the Central
Controller.
4.
Disarm the system.
5.
Press the Messages key on the Central controller to verify
that the proper signals were received.
6.
Call the Central Station to verify that the
proper channel
and account code were received.
AT&T
Proprietary Information
2-75