Filter
Top Products
. Set House Code/Option DIP Switches:
Switches
1
-
7 set
the house code.
Switch 8 sets the selectable sensor loop zone to either
of the following
ON
=
interior
OFF = perimeter delayed
. Set ID/Options DIP switches:
Switches 1
-
5 set the transmitter identification
number.
Switch 6 sets the selectable sensor loop to either of the
following
ON
= open loop
OFF
= closed loop
Switch 7 sets the battery saver function is used when a
sensor is commonly activated many times on a daily
basis. When the function is set to ON, there is a
minute delay between sensor-activated transmissions.
ON
= Battery saver on
OFF
=
Battery
saver off
_
Switch 8 sets the transmitter for either of the following:
ON
= high security
OFF
= low security
AT&T Proprietary Information
2-45