Filter
Top Products
b.
Press
the Test/Demo key on the Central Controller.
The digital display will show an
"88".
C.
Within 2 seconds, touch all four keys on the Central
Controller at the same time (Messages, Clear
Display,
Cancel,
and Test/Demo). The digital
display will show a ‘CC”.
d.
Listen for the Installer Test Mode indication beeps to
start.There will be one beep every forty seconds.
7.
Perform the Wireless Remote/Transmitter RF link test.
a.
Use a
pencil
to press either the Home, Away, or Off
key.
b.
Listen for the proper number of indication beeps
from the Central Controller.
3 Beeps -
2 Beeps -
No Beeps -
Excellent RF link.
Marginal RF link. The
transmitter should be relocated.
No RF message was received. A
different location must be
chosen.
C.
Check the Central Controller to verify that the
proper transmitter ID number appears.
d.
Check the status LEDs on the Central Controller for
more
iuformatiou.
AT&T Proprietary
Information
2-48