Filter
Top Products
Run optional
auxiliary
sounding device
wires to the Wireless Siren/Controller
CAUTION: The Wireless Siren/Controller provides a total of
450
MA
for auxiliary sounding devices. Do NOT exceed this total.
If an
auxiliary
sounding device(s) is being installed, connect the
wires to the terminals labeled ‘ONE OR
TWO
EXTERNAL
SIRENS”. Use the strain relief posts.
Install the auxiliary sounding device(s)
according to the manufacturer’s
instnrctions
Thread
all
wires through the plastic strain
relief posts before connecting to screw
terminals
Attach the power cord/antenna wire to
Use only a Comcode Number 8456837
12
VAC transformer.
the transformer
Plug in the
transformer
Use a 120 VAC, 60 Hz, wall outlet. Secure the transformer with
the screw provided (#6-32).
Verify that the AC Power Light is ON
12 VAC
power
in
AT&T
Proprietary
Information
2-73