Filter
Top Products
STEP 20
Program the wireless Siren/Controller
Set the House Code/Option DIP SWITCHES:
- Switches 1 - 7 set the House Code.
-
Switch 8 determines whether the Witless Siren/Controller’s
internal sounder is on or off during an intrusion alarm.
ON =
Silent
OFF =
Sound
-
Switch 9 should ALWAYS be ON.
Choose
the
Wireless
Siren
/Controller
Apply the information presented in the Installation Information
Antenna
Run
section to each individual installation. It’s critical that you identify:
-
Sources of possible RF interference
-
Potential blocks to RF waves
Run the Antenna/Power
Line
from
the
WIreless
Siren/Controller
to
the
Transfonner
The
power
cord/antenna wire
should
be #18
AWG
wire.
Connect the antenna/power wire to the TOP two screw terminals
labeled ‘12 VAC POWER IN”.
House
code
Internal sounder setting
system setting (always up)
AT&T
Proprietary
Information
2-72